IMPORTANT
!!! Please note that this Gold Mount module is configured for 11-17V Batts ONLY. NO 26V Gold Mount Batts will work on this plate !!!
After the great uptake of the NPF and V-Lock modules, we can now offer a limited run of Gold Mount STINGRAY Modules!
-------------------------------------------------------------------
In collaboration with Focus Puller Karl Walsh (Ireland based), we developed the NPF and V-Lock based, modular and universal power plates for your monitor setups. It's taken some time, but it has allowed it to test it on various monitors, in lots of conditions and over a longer period of time. Made from 100% recycled Carbon Fibre material, it's stronger, more heat-resistant and lighter than ever.
POWER OPTIONS
The STINGRAY power module offers a load of different power options, for all your accessories. The Gold Mount version provides:
- 2x D-Tap Connectors (10-14V)
- 1x 2-Pin Lemo Connector (10-14V)
A Volt Meter is also hard-mounted on the side, so you never have to rely on battery indicator lights ever again.
WAY OF USE
Consisting of 2 parts, the STINGRAY System allows for quicker changes, cleaner setups and overall faster ways of working. It works as follows:
- Choose your monitor! This can be any of the below versions, future support to come.
- Grab one of our Teradek or Vaxis supporting monitor brackets and screw it on.
- Mount your STINGRAY power module on the back of the monitor bracket, plug in your cables and you are GOOD TO GO!
The universal dimensions of the power module means that transferring between monitors is easy, quick and clean. Get a different monitor? No worries, just get yourself a different bracket and you are good to go. (God forbid) you drop your focus setup and the monitor bracket breaks? No worries, just grab yourself a low-cost monitor bracket and you're golden.
Want to mount the module directly onto the monitor without a wireless setup? Every monitor bracket comes with a hard-mounted option as well, so you can pack it down even tighter if you'd like to.
IN THE BOX:
- STINGRAY Gold Mount Power Module
- Allen Key Set
All STINGRAY products are backed by our 2-year warranty.
STINGRAY Power Module | Gold Mount
All of our STINGRAY products are printed with recycled material!
The material STINGRAY is made of is 100% recycled Carbon Fibre, provided by our usual trusted supplier.
Unfortunately we see a lot of waste on a day-to-day basis, and our clips, clamps and adapters can be a way to move from single-use plastics to a long-term, more heavy-duty solution. E.g. Instead of a quick fix with a single-use zip-tie, make sure your equipment and cables are securely fastened in the first place! 😉 Using tape to quickly fix a cable to a stand? Why not use a re-useable clamp and save that single-use product? These are the problems we are trying to solve.
Want to read more? Please visit our About page to see where our material comes from.
We just want to put a small disclaimer out there that (although we strive for that picture-perfect finish every time) there might always be some small blemishes on 3D-printed parts. These are things that we always try to avoid, but sometimes happen as it is a manual process.
